[pageLogInLogOut]

#India ITME 2026

Uster to present novel solutions at India ITME 2026

Contamination control – and other choices for profitability

Uster Contamination Control for optimum clearing at minimum cost © 2026 Uster Technologies
Tackling contamination is a critical quality target in yarn production – and Uster now enables spinners to make the right choices for optimized profitability, with top technology, precise data and integrated analysis across the entire process. The new Uster Contamination Control solution and latest Uster Vision Shield 3i put spinners in command of contaminant removal, ensuring yarn quality, minimizing waste and protecting profits. These exciting developments – and even more news – will be featured at India ITME 2026.

The major gathering of the Asian textile industry in 2026, at India ITME, taking place from December 4 to 9 at IEML, Greater Noida, UP, offers Uster a great opportunity to present its latest innovations: Uster Contamination Control, Uster Vision Shield 3i and Uster Trade.

Starting with raw material

The new Uster Contamination Control concept unites a range of valuable services for spinners in a holistic approach that combines data from the incoming raw material, the fiber cleaning system and the yarn clearers. It’s a next-level evolution of the well-proven Total Contamination Control (TCC).

The three-way connection between raw material management through FiberQ, fiber cleaning with Uster Contamination Control (UCC) and yarn clearing with Uster Quantum creates a unique end-to-end solution. It’s a comprehensive approach for consistent contamination control and optimized spinning performance – from raw material to yarn.

The raw material is the source of contamination – so that’s where the assessment starts. The next step is bale laydown. Finally, the results from these two points are correlated with data from the Vision Shield and the Quantum yarn clearers. UCC now offers this overall data-based analysis to recommend the best possible decisions and settings for mill management.

Furthermore, detailed analysis of mixes and contamination has benefits when assessing the incoming material from suppliers. Mills might be guided to deal with contamination issues at source, potentially by changing their sourcing options. Monitoring laydowns in this way adds even greater value to the spinning operation.

The right level of control – consistently

Contamination control needs to achieve the requested level consistently, regardless of any deviations in raw material or process settings. It all depends on proper monitoring, on-time information and data-based decisions. A holistic view is needed to deliver the right results consistently. With the new Contamination Body feature (analog defect classification for yarn), UCC provides smart limits for contamination, actionable insights, and automated contamination management. These benefits arise from Uster’s contamination classification at the fiber cleaning stage.

Cost is obviously another vital factor for successful contamination control. Removing only the really disturbing material is critical. It means minimizing good fiber loss and avoiding unnecessary waste.

Under the 360Q Platform, the new UCC is able to simplify settings management and distribution. Creating the right settings and applying them to multiple machines or a specific mixing is easy, fast and reliable.

Vision Shield 3i – intelligent fiber cleaning

High-performance detection is the key to proper contamination removal. With the new Vision Shield 3i fiber cleaning system, Uster introduces the next generation of vision systems, including high resolution, sophisticated AI integration – as with an AI-enabled detection system for polypropylene – and other innovative features, while ensuring reduced waste per ejection and low maintenance.

Uster has now developed SpecFusion technology, combining multiple detection sensors and intelligent multi-wavelength illumination to support more reliable contamination detection and optimum cleaning performance.

With the Vision Shield 3i spinners can detect everything, from colored objects to transparent polypropylene (PP), with greatest accuracy, regardless of size and intensity. This gives the option of either removing the unwanted material or deciding what is an acceptable level of ‘disturbing’ fragments in relation to the waste created.

Uster Vision Shield 3i - intelligent fiber cleaning © 2026 Uster Technologies
Uster Vision Shield 3i - intelligent fiber cleaning © 2026 Uster Technologies


To achieve optimum cleaning with minimum waste, spinners can apply settings tailored to the specific Contamination Body. The Contamination Body follows the concept of Uster’s unique and successful Yarn Body for yarn clearing. It helps to identify the potential for further optimization, while also allowing them to assess the impact of any setting changes on ejection levels.

Every Vision Shield 3i can connect with Quantum and also to 360Q. There the well-known raw material solution of Uster FiberQ operates, so the three systems can share data with a common analysis tool. All data is collected and is available anywhere in a complete eco-system.

Uster Trade – quality ranking for the competitive edge

Uster Trade is the new solution supporting mills in continuously improving overall quality consistency and ranking to demonstrate their value to customers, thereby creating a competitive advantage.

Uster Trade continuously monitors quality consistency and highlights deviations early, enabling faster corrective actions and more reliable production output. By continuously monitoring quality consistency and providing end-to-end traceability for root-cause analysis and claims handling, Uster Trade allows for faster issue resolution and more stable production performance.

Spinners can benefit from a digital service that includes quality consistency standards and a quality ranking tool, enabling them to prove the overall quality in terms of fabric appearance and performance. In this way, Uster Trade helps mills produce better, control better, and sell better.

Uster Trade gives mills a competitive advantage © 2026 Uster Technologies
Uster Trade gives mills a competitive advantage © 2026 Uster Technologies

Quality in spinning – the comprehensive approach

Uster offers a unique view of quality from fiber to fabric. Visitors to the upcoming India ITME are warmly invited to discover the latest Uster solutions for quality management and contamination control in particular. They can get first-hand information directly from Uster experts at Booth C18 in Hall 11.





More News from Uster Technologies AG

#Recycled Fibers

Driving circularity with Uster Recycled Fiber Matrix

The textile industry’s commitment to circularity continues to accelerate, and mechanical recycling is viewed as a targeted approach to cutting textile waste and its environmental impact. At the forefront of this drive, Uster has developed the Recycled Fiber Matrix, a two-dimensional assessment of mechanically recycled fibers to guide optimum processing and end-uses.

#ITM 2026

Uster’s new Recycling Opening Index guides spinners to the perfect blend

Uster AFIS 6 now offers the key data for better decisions when blending recycled fibers. Process control is decisive in determining the quality and economic outcome. The new R Recycling Module of AFIS 6 introduces the Recycling Opening Index (ROI), so spinners can optimize their circularity credentials. It was officially launched at ITM 2026 in Istanbul, Türkiye.

#Spinning

Measure and control the fiber – optimize yarn quality

Producing consistent yarn quality is an everyday challenge – and a very difficult one. Detailed knowledge and understanding of the fiber raw material is absolutely critical to achieving the best possible quality in the yarn. To help spinners, Uster experts have put together guidelines for avoiding yarn irregularity claims, in a special edition of the Uster News Bulletin.

#ITMA Asia + CITME Singapore 2025

Uster presents novelties at ITMA Asia + CITME 2025

There’s news from Uster Technologies to be announced for the industry’s upcoming event in Singapore. The Uster 360Q universe is growing with new products, solutions and services. Innovation developments can also be recorded in the fields of man-made fiber testing and fabric inspection. Uster innovations address the industry’s trending topics as mill management and process control, optimization of delivered fabric quality and yield.

More News on India ITME 2026

#India ITME 2026

India’s textile industry: Current position, growth targets and industrial development

With ambitious export targets, major investments in manufacturing infrastructure and new international trade agreements, India is pursuing a comprehensive development strategy for its textile and apparel industry. An overview of the industry’s current position, government initiatives, progress achieved and challenges ahead.

#India ITME 2026

India ITME 2026: Textile technology meets India's investment ambitions

With ambitious growth targets, government incentive programmes and industrial development initiatives already underway, India is preparing for the next stage of its textile transformation. Against this backdrop, the 12th India ITME, taking place in Greater Noida from 4 to 9 December 2026, arrives at a particularly important moment for machinery manufacturers and textile producers alike.

#Spinning

Barmag’s single-stage Bi-Shrinkage concept impresses with yarn quality and efficiency

The Indian company Garden Silk Mills Pvt. Ltd. adopts Barmag's new single-stage Bi-Shrinkage Yarn (BSY) spinning concept based on WINGS FDY PLUS eco. The systems, which have been in operation for about a year, deliver excellent yarn quality with very good productivity.

#India ITME 2026

Trützschler brings intelligent fiber processing and automation to India ITME 2026

From December 4 to 9, 2026, the Trützschler Group will present its latest innovations in spinning, card clothing and nonwovens at India ITME in Greater Noida, India. At Hall 11, Booth B15, visitors can discover solutions designed to increase productivity, reduce operating costs and ensure consistently high product quality. Key highlights include the intelligent card TC 26i, the 12-head comber TCO 21XL, innovative card clothing solutions for improved fiber utilization and quality, as well as advanced nonwovens technologies for hygiene, wipes and technical applications.

Latest News

#Weaving

“A complex design is only useful if the machine can reproduce it consistently”

Andreas Schnabel, Head of R&D for Technical Weaving Systems at Stäubli, discusses how 3D weaving can create textile reinforcements tailored to the loads within a composite component, where near-net-shape weaving can reduce processing steps and material waste, and what it takes to produce complex structures reliably and economically. He also explains how manufacturers can adapt Stäubli’s modular TF weaving platforms to new applications and how the company’s centre of excellence in Bayreuth supports the transition from research to industrial production.

#ITMA Asia + CITME 2026

ITMA ASIA + CITME 2026: Shanghai prepares for a record edition

With record demand for exhibition space, a strong presence of international technology suppliers and growing interest in automation and intelligent manufacturing, ITMA ASIA + CITME 2026 will provide an important overview of technological developments in the world’s largest textile producing region.

#ITMA Asia + CITME 2026

Saurer showcases flexible spinning solutions from bale to yarn at ITMA ASIA + CITME 2026

At ITMA ASIA + CITME 2026 in Shanghai, Saurer will demonstrate how its advanced technologies enable maximum flexibility across the entire spinning process, from bale to yarn and twisting. Visitors to hall 6.1, booth A58, can explore solutions designed to optimise production, improve efficiency and help mills respond quickly to changing market demands. Saurer's experts will be available to discuss individual production challenges and tailored solutions.

#Nonwovens

Freudenberg Performance Materials brings interlining production to Vietnam for faster regional supply

Freudenberg Performance Materials Apparel (Freudenberg Apparel) has expanded its manufacturing capabilities in Vietnam with local apparel interlining production at its factory in Long Thanh, Dong Nai. Apparel brands and manufacturers in Southeast Asia can now source both interlinings and comfortemp® thermal insulation from Vietnam, benefiting from shorter lead times, improved supply responsiveness, and consistent quality standards across Freudenberg Apparel’s regional manufacturing network.

TOP