#ITMA Asia + CITME Singapore 2025

2025-10-30

T-CAN – Revolutionizing can transport

In virtually all spinning mills, transporting sliver cans is still done manually. Rising labor costs, lack of operators and increasing quality requirements make this a growing challenge. With T-CAN, Trützschler introduces a practical solution: a fully automated can transport system that will be presented live at ITMA ASIA 2025 in Singapore.

Efficient and reliable automation

T-CAN automates the transport of sliver cans between cards, breaker draw frames, and finisher draw frames – quickly and precisely. The system combines sliver cans with automated guided vehicles (AGVs) and a smart software interface that tracks every movement and places each can exactly where it belongs.

What T-CAN delivers

T-CAN minimizes manual handling and transport, supports continuous production (also at lunch breaks and night shifts), and ensures consistent quality through reliable material allocation. Therefore, mills benefit from lower labor costs, higher machine efficiency, and improved sliver quality – all with a system that adapts to your mill, not the other way around.

“With T-CAN, we’re responding to our customers’ needs for intelligent automation. Our goal was to create a solution that not only reduces operational costs but also enhances quality and consistency in sliver handling. It’s a leap forward in making spinning mills smarter.” – Alexander Stampfer, CSO Trützschler Group.

Simple to use

Despite its advanced technology, T-CAN is easy to operate. The intuitive software interface requires only a few minutes of training and no prior expertise in robotics.

Scalable and future-ready

T-CAN is ideal for medium to large spinning mills with high output and automation goals. But thanks to its modular design, it’s also a smart choice for smaller mills looking to future-proof their processes. T-CAN is built to easily scale with your ambitions.

Proven performance

One of the first adopters of T-CAN was JINGYI, a spinning mill in Sheyang, China. After a successful pilot project, JINGYI placed an order to automate can transport for over 120 TC 26i cards and 240 draw frames. T-CAN has proven itself as a robust, reliable, and operator-friendly solution. “We were impressed by the performance and reliability of T-CAN during the pilot phase. It has significantly improved our efficiency and reduced our staffing needs. That’s why we decided to implement it across our entire carding and draw frame section.” – Mr. Peng Fujian, Deputy General Manager JINGYI Group.

Experience it live

Visit the Trützschler booth at ITMA ASIA 2025 in Singapore to see T-CAN in action, talk to our experts and discover how it can transform your production.

Trützschler’s latest spinning and card clothing innovations at CAITME 2026

From September 8 to 10, 2026, Trützschler will present its latest innovations in spinning and card clothing for state-of-the-art fiber processing at CAITME in Tashkent, Uzbekistan. Visitors are invited to meet the experts at Pavilion 2, Booth D50 and explore solutions designed to increase productivity, streamline processes, and ensure consistently high yarn quality. Key topics include the next-generation card TC 30i, the integrated draw frame IDF 3, the high-performance comber TCO 21XL as well as Trützschler Card Clothing’s new flat top series STEELTOP®.

Pre-Cleaner CL-X: Proven in cotton cleaning – creating value beyond the spinning mill

Since its market launch, the CL-X has firmly established itself in blowroom lines worldwide. Hundreds of installations confirm its ability to deliver superior cleaning efficiency, lower waste, higher productivity and significant energy savings. Now, new customer applications show that the CL-X not only continues to excel in spinning preparation – it is also entering a completely new field of application: ginning.

STEELTOP®: A new benchmark in flat tops for spinning preparation

Modern carding generations achieve higher production performance, placing significantly greater stress on flat tops. Higher cylinder speeds and increased fiber density, combined with tighter carding gaps, create more demanding operating conditions. At the same time, poorer raw material quality and the increased use of recycled materials further intensify these challenges. With STEELTOP®, Trützschler introduces a new full steel flat top series developed for these demanding modern carding processes.

Ibrahim Fibres and Trützschler: A strong partnership enters its next phase with the TC 30Si

For more than two decades, Ibrahim Fibres and Trützschler have grown side by side, driven by a shared ambition to continuously improve spinning performance, strengthen technology leadership and set new benchmarks in the textile industry. Today, Ibrahim Fibres is a leading yarn and polyester staple fiber manufacturer in Pakistan. The company operates the largest number of Trützschler cards in the country, with more than 200 machines running across its mills in Faisalabad, and plays an important role in one of Asia’s largest textile industries.

India becomes growth engine for the warp knitting industry

ITMA ASIA 2025 exceeded all expectations for KARL MAYER – above all thanks to the strong interest from India: around 30% of the qualified discussions were held with partners from this traditional textile country. The response underlines the growing importance of the Indian market, which could become the second largest sales region for KARL MAYER after China. The warp knitting industry in particular is developing dynamically.

India ITME Society pushes trade & technology alliances in Singapore

India ITME Society hosted India Networking Program - Fabricating the Future of Textile Industry- From Heritage to High-Tech” on 29th October 2025 at Singapore an exclusive gathering of Ministry of Textile Officials, Embassy Officials, Entrepreneurs, Technocrats, Industry Organizations and Media Personnel's designed to foster collaboration, exchange ideas and explore opportunities in the Indian Textile & Textile Engineering Sector.

Innovation and customer proximity – KARL MAYER’s clear focus makes an impression

ITMA ASIA in Singapore was a resounding success for KARL MAYER, exceeding all expectations. The company welcomed visitors from 39 countries and held around 570 expert discussions. Most guests came from India, followed by China, Indonesia and Pakistan. The exchange with them was both well-founded and targeted. Conversation topics ranged from investment projects and new technologies to opportunities for cooperation and business expansion.

SHIMA SEIKI to showcase flat knitting and digital design solutions at Egypt Stitch & Tex

Leading Japanese computerized flat knitting technologist SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its sales representative in Egypt, TTS (EL MASRIA FOR TRADE & TECHNICAL SERVICES), will participate in the upcoming 24th International Exhibition for Textile & Carpet Machineries, Printing Technologies and Accessories (Egypt Stitch & Tex) to be held in Cairo, Egypt this month.

Coats Digital launches AI-powered GSD RealMotion for motion analysis

Coats Digital has launched GSD RealMotion, an AI-powered solution designed to provide apparel manufacturers with greater visibility into factory-floor operations. By analysing shop-floor video and applying Coats Digital’s GSD methodology, the solution turns video recordings into structured, motion-by-motion method studies.