#Spinning

2025-03-13

Rieter closes the financial year 2024 with a solid operating result

Order intake was significantly higher than in the previous year at CHF 725.5 million (2023: CHF 541.8 million), representing an increase of 34%. This was the fourth consecutive quarter of year-on-year growth. As expected, the Rieter Group closed financial year 2024 with lower sales of CHF 859.1 million (2023: CHF 1 418.6 million) and thus remained 39% below the prior year. Despite significantly lower sales, an operating result (EBIT) of CHF 28.0 million (2023: CHF 104.8 million) and thus a solid EBIT margin of 3.3% (2023: 7.4%) was achieved.

Order intake

Order intake in 2024 was 34% higher than in the previous year at CHF 725.5 million (2023: CHF 541.8 million). Rieter thus succeeded in strengthening its competitive position in a challenging market environment. An initial market recovery was visible compared with the previous year.

Sales by division

The Machines & Systems Division posted sales of CHF 424.9 million, a decrease of 56% compared with the previous year (2023: CHF 965.0 million). In the Components Division, sales declined to CHF 247.6 million, down 7% from the same period of the previous year (2023: CHF 266.2 million). The After Sales Division reported sales of CHF 186.6 million, comparable to the previous year (2023: CHF 187.4 million).

Order backlog

At the end of 2024, the company had an order backlog of about CHF 530 million (December 31, 2023: CHF 650 million).

EBIT, net profit and free cash flow

Profit at the EBIT level in the year under review was CHF 28.0 million (2023: CHF 104.8 million), which represents an EBIT margin of 3.3% (2023: 7.4%). Despite significantly lower sales, a solid EBIT margin was achieved. This is mainly due to the consistent implementation of the measures set out in the “Next Level” performance program.

Rieter closed the 2024 financial year with a net profit of CHF 10.4 million (2023: CHF 74.0 million).

Free cash flow amounted to CHF 14.1 million (2023: CHF 118.7 million). Net debt increased due to new lease liabilities in connection with the Campus in Winterthur to CHF 230.3 million (2023: CHF 191.2 million).

The equity ratio as of December 31, 2024, rose to 33.7%, mainly due to positive currency effects and lower net working capital (previous year’s reporting date 28.8%).

Dividend

The Board of Directors proposes to shareholders the distribution of a dividend of CHF 2.00 per share for 2024 based on the positive free cash flow of CHF 14.1 million and the improved equity ratio of 33.7%. This corresponds to a payout ratio of 85.8%.

Sustainability

Rieter has a clearly defined sustainability strategy that is closely linked to the Group strategy. Through the Science Based Targets initiative, Rieter made a commitment in 2024 to define company-wide emission reduction targets for the year 2040, which are consistent with scientifically-based net-zero goals. In this way, the Rieter Group takes responsibility for its own impact while supporting its customers on their sustainability journey. In the 2024 Annual Report, the report on non-financial matters shows the progress Rieter has made in the areas of environmental, social and corporate governance.

Outlook 2025

Rieter expects a challenging first half in 2025 with regard to sales volume and a stronger second half-year depending on the further market recovery. As a consequence, Rieter anticipates a sales volume at the previous year’s level for the full year 2025. Despite this exceptionally low sales level, Rieter anticipates a positive EBIT margin between 0% to 4% for the year 2025.

Rieter reports stable order backlog and strategic progress – outlook for 2025 adjusted

In its Investor Update 2025, Rieter announced an order intake of CHF 203.9 million in the third quarter and CHF 559.3 million after nine months, reflecting a continued cautious investment climate in the textile machinery sector. Sales totaled CHF 121.5 million in the third quarter and CHF 457.7 million for the first nine months of the year, while the order backlog stood at around CHF 590 million as of September 30, 2025.

Rieter will highlight the fully automated spinning mill at ITMA Asia 2025

Precision, speed and cost efficiency are all indispensable, especially in challenging times. Rieter has put together a powerful portfolio for ITMA ASIA + CITME 2025 that gives spinning mills the chance to actively shape the future through intelligent automation. By applying smart machine networking, process optimization and increased production efficiency, the portfolio facilitates the comprehensive transformation of spinning mills while reinforcing their competitiveness. This, in turn, enables customers to further consolidate their leading market positions. At the same time, the portfolio is a key milestone on the way to achieving Rieter’s vision 2027 – the fully automated spinning mill.

FET prepares for final exhibition of 2025

Fibre Extrusion Technology Ltd (FET) of Leeds, UK has completed its second major exhibition of 2025 at ITMA ASIA in Singapore, which is aimed at the textile and garment industry in South and Southeast Asia and the Middle East. Once again, this trade show proved to be a successful one for FET, with considerable interest from several countries surrounding China.

T-CAN – Revolutionizing can transport

In virtually all spinning mills, transporting sliver cans is still done manually. Rising labor costs, lack of operators and increasing quality requirements make this a growing challenge. With T-CAN, Trützschler introduces a practical solution: a fully automated can transport system that will be presented live at ITMA ASIA 2025 in Singapore.

textile.4U publishes special edition “Top 100 Textile Recycling Companies 2025”

With a comprehensive 176-page special edition, textile.4U is dedicating its latest issue entirely to one of the most dynamic and influential topics in today’s textile industry: textile recycling. The new issue, published exclusively in high-quality print, presents the Top 100 textile recycling companies researched and selected by TexData – organizations that already play a key role in the transition to circular textiles or are expected to have a significant impact in the near future.

Marzoli unveals its new textile ecosystem at ITMA ASIA + CITME 2025 at Singapore

With the claim “Designed to Impact”, Marzoli showcases its evolution into a complete engineering company for the textile industry. By combining advanced machinery, digital intelligence, science of materials and innovative services, the company enables textile manufacturers unlock new business opportunities, and accelerate their path to innovation and differentiation.

38th International Cotton Conference Bremen launches registration and unveils key topics

Participants can now register online for the 38th International Cotton Conference Bremen, which will be held on 25-27 March 2026 at the Haus der Bürgerschaft parliament building on market square. All visitors can look forward to a high-calibre conference programme, numerous additional meetings and a valuable exchange of knowledge and information. The comprehensive range of topics covering the entire value chain will provide practical expertise, address current developments, answer key industry questions, and provide new impetus for the future.

Innovation and customer proximity – KARL MAYER’s clear focus makes an impression

ITMA ASIA in Singapore was a resounding success for KARL MAYER, exceeding all expectations. The company welcomed visitors from 39 countries and held around 570 expert discussions. Most guests came from India, followed by China, Indonesia and Pakistan. The exchange with them was both well-founded and targeted. Conversation topics ranged from investment projects and new technologies to opportunities for cooperation and business expansion.