#Nonwovens

2025-09-04

Freudenberg Performance Materials publishes first Sustainability Report

With the publication of its first sustainability report, Freudenberg Performance Materials has reached a major milestone on its path toward greater environmental responsibility and corporate transparency. Until now, information about the company’s sustainability performance was only included in the sustainability report of its parent company, the Freudenberg Group. The newly released report, however, focuses specifically on the business of technical textiles.

Sustainability at Freudenberg is more than a strategic necessity – it is deeply rooted in the company’s 175-year history. Freudenberg Performance Materials also aligns with the UN Brundtland definition and aims to minimize waste and emissions while reducing the use of energy, materials, and water. By 2045, the goal is to achieve CO? neutrality at all sites (Scope 1 and 2).

In 2024, Freudenberg Performance Materials made significant progress:

+ CO? emissions (Scope 1 & 2) were reduced by another 3% – 29% less than in the base year 2020.

+ Despite higher production levels, energy efficiency improved by 10%.

+ 30% of all purchased electricity came from renewable sources, powering 25 production lines with green energy.

+ The share of green energy in the total energy consumption rose by 26% to 13.5%.

+ The company’s biggest gas-powered asset was replaced with wet-scrubber technology, resulting in a reduction of approximately 4,000 tons of CO?.

In addition, Freudenberg Performance Materials has defined medium- and long-term sustainability goals that serve as guidelines for short-term planning and decision-making. In preparation for the upcoming EU regulation “Ecodesign for Sustainable Products Regulation” (ESPR), the company has begun implementing software to calculate the Product Carbon Footprint (PCF).

© 2025 Freudenberg Performance Materials

Further information: Sustainability Report - Freudenberg Performance Materials

https://www.freudenberg-pm.com/annualreport/sustainabilityreport2024

Freudenberg Performance Materials presents Mehlerheytex and Filc at Techtextil 2026

Freudenberg Performance Materials will showcase textile innovations that increase efficiency, performance and sustainability in industry and mobility at Techtextil 2026. For the first time since the merger of Mehler Texnologies and Heytex, the MehlerHeytex brand will make its debut as a leading expert in coated technical textiles. Moreover, Freudenberg Performance Materials Filc (Filc), specialist for advanced needlepunch nonwovens and laminated materials, will present its groundbreaking solutions for automotive applications. Filc customers can benefit from the perfect combination of functionality, comfort and sustainability. The Freudenberg Performance Materials experts are looking forward to welcoming visitors to the trade fair at Stand A11 in Hall 11.0 from April 21 – 24, 2026.

Freudenberg accelerates local production for apparel market by expanding its site in India

Freudenberg Performance Materials Apparel (Freudenberg Apparel) celebrates the grand opening of a major expansion at its manufacturing facility in Chennai, India, on October 14, adding 20,000 square feet of production space and introducing new production lines tailored to the Indian apparel market. This strategic investment is aimed at significantly reducing lead times and enhancing the availability of high-quality, locally produced interlinings for the fast-evolving apparel sector in India and South Asia.

Freudenberg to exhibit for the first time at CAMX 2025

Freudenberg Performance Materials (Freudenberg) will be exhibiting for the first time at CAMX 2025 in Orlando, Florida, from September 9-11. This presence is a strong signal from the leading global supplier of technical textiles to support the North American composites industry with high-performance surfacing veils, flow media and spacers. Visitors can meet Freudenberg experts at booth D69 on the show floor.

Freudenberg PM unveils versatile innovative fine denier spunbond nonwovens for applications in construction, filtration and coating

The unique fine filament nonwoven technology from Freudenberg Performance Materials (Freudenberg) is made from a wide variety of polymers and blends using mono or bico fibers. The high flexibility and broad customization options provide benefits in a wide range of markets and applications – from roofing membranes to liquid filtration, as well as specific applications such as dehumidification products and artificial turf.

Sustainability: European industry calls on EU to keep Single-Use Plastics Directive unchanged

A broad coalition of European industry associations, including EDANA, Euratex and Plastics Europe, has urged EU institutions to maintain the current legal framework of the Single-Use Plastics Directive (SUPD). In a joint statement, the organisations argue that reopening the Directive at this stage would create legal uncertainty, increase regulatory complexity and undermine investment, while its implementation across the European Union is still incomplete.

EDANA announces five new board members following 2026 Annual General Meeting

The EDANA Board of Governors is elected or re-elected at the Annual General Meeting by the member companies. The Governors are senior executives (business leaders) from member companies, based in different countries and representing different sectors of the nonwovens industry. The Board has central responsibility for guiding EDANA's overall strategy and approving its policies and priorities. It meets three times a year.

Reju opens its first R&D Center in the U.S. in Conshohocken, Pennsylvania

Reju, the company specializing in textile regeneration, today announced the opening of a Research and Development (R&D) Center in Conshohocken, Pennsylvania, the company's first proprietary research center in North America. Located within Technip Energies' existing Advanced Materials and Catalysts research center, the lab will allow Reju to accelerate the rollout of its recycling technologies and develop its next-generation circular solutions.

Itema reaffirms its commitment to the Syrian textile industry at NasTex 2026

From July 18th to 21st, Itema will exhibit at NasTex at the Damascus Fairground (Hall 11 – Stand C02), marking its return to one of the Middle East’s historically significant textile markets. Itema will showcase advanced weaving technology designed to support the competitiveness and technological evolution of Syrian manufacturers and announces a new partnership with Growfast Agency as the sole agent of Itema in Syria.

KARL MAYER's HKS 2-SE Expands Possibilities for Premium Stretch WARP KNITS

Warp knitted fabrics with a woven look are more in demand than ever in the fashion and apparel industries. Stretch WARP KNITS, in particular, impress with their freedom of movement, breathability, and virtually wrinkle-free wear – thereby opening up new style worlds such as smart casual or business casual. When it comes to the highly efficient production of premium-quality stretch WARP KNITS, the HKS 2-SE has long been the machine of choice. KARL MAYER’s best-selling tricot machine produces standard elastic fabrics characterized by high gauges, smooth, delicate surfaces, and a soft hand feel.